[BigBoyinMo]

You should be able to contact the agency responsible for water conservation/water districts. The well driller would have had to pull a permit to drill the well and they should have the information on the well or be able to tell you who drilled the well and they will have records. Short of that, your could loosen the well cap and send a string with a steel weight on the end all the way to the bottom of the well. As you pull up the string, mark the string were it is first wet then finish pulling up the string. Measure how much string was lowered, then the length of the wet string. Now you know they depth of the well and how many feet of water is in the well. Now you can also figure how far down to static water level.

• This reply was modified 5 months, 1 week ago by  BigBoyinMo.