Reply To: Thermoelectric power

  • BiggKidd

    Member
    February 3, 2024 at 8:38 pm

    Managed to drag my sorry old arse out and get the firebox installed. It’s all welded in and up and burning. It’s burning dirty though / incomplete combustion. Not at all happy about that. It could be the wet wood or partially the wet wood. Anyway the front of the firebox is up over 1000F and the exhaust is down around 130F. I’m hoping the burn will clean up once the heat exchanger is up to temp. If that’s the case then it’s just a cold start issue and the dirty burn will not really be an issue as once this thing is in use it will stay up above 200f inside.

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .